The parts listed below are for the 2005, 2006, 2007 and 2008 Velocity Chassis.
FEATURES AND SPECIFICATIONS
*23 1/2" kingpin to kingpin
*Drag link tie rod assembly for improved ackerman geometry
*1 1/4" frame rails
*5/8" front axles
*Powdercoat paint in black, red, blue, clear, yellow. (Special colors available)
*Eight tabs to mount weight to the frame
*Right side adjustable billet seat strut
*Reversible extra long front hubs to allow for more front rim options
*Laydown speedway style seat
INCLUDED AS STANDARD EQUIPMENT
*Sliding lead scale that lets you see at a glance exactly how much lead is in the kart
*Wedge scale- gauges left rear cross adjustment
*Easy to adjust camber settings
*Removable rear bearing shields that allow bearings to be cleaned and lubricated without removing the bearings from the kart
*Hard anodized lightweight rear cassettes with grease zirks for lubricating the bearing race. Helps to keep the axle "free".
*Left rear extended hub, allows in and out adjustment of the left rear wheel hub without removing the wheel.
*Thin wall aluminum spacers fit over the right side of the rear axle. These spacers eliminate the chance of the right rear wheel sliding in during a race.
*Lightweight aluminum brake caliper mount that prevents brake bind by moving with the axle when lead or cross weight adjustments are made.
*User friendly left rear weight jack assembly that allows cross weight adjustment in less than a minute, with the driver in the kart, on the scales. Weight jack is located inside the frame so there is more room for rear track width adjustments.
*New threaded spindle inserts allow for front end cross adjustment.
*Toe Lock
*Adjustable wheel base on the right side of the kart. Adjusts rear axle lead.
*Adjustable lead at the front spindles.
*Spindle ride height adjustment.
*Martin Minilite brakes.
*In depth set up sheet with each chassis.
